General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 149
Bridge Setup Screen
The Bridge Setup screen enables you to select a Spanning Tree protocol and enable/disable bridge
ports.
Access the Bridge Setup screen, shown in Figure 63, by using the arrow keys to highlight the
Bridge Setup option and pressing ENTER. The Bridge Setup screen displays.
Figure 63 Bridge Setup Screen

Bridge Setup Screen Fields

The following list describes each of the Bridge Setup screen fields:
Spanning Tree Protocol — Use this field to select a Spanning Tree protocol. Possible selections
for this field are IEEE 802.1, DEC, or NONE.
Bridge Port Admin Status — Use this field to enable or disable individual CSX400 bridge ports.
Possible selections for this field are ENABLED or DISABLED.
Bridge Port Pair Admin Status — Use this field to enable or disable bridging between bridge
port pairs. For example, you can enable Port 1 to bridge traffic to all ports except Port 2.
BRIDGE SETUP
SPANNING TREE PROTOCOL:
BRIDGE PORT ADMIN STATUS:
BRIDGE PORT PAIR ADMIN STATUS:
SAVE
[IEEE 802.1]
PORT 01 --> ALL PORTS
PORT XX --> PORT [02]
BRIDGE_PORT [01] RETURN
[ENABLED]
[ENABLED]
2012_08
CSX400 Local Management Flash Image Version: XX.XX.XX