Cabletron Systems NB20E, NB25 E user manual Installing the Rack Mount Brackets

INSTALLING THE NB20E OR NB25E BRIDGE

3.2.1Installing the Rack Mount Brackets

If the NB20E or NB25E will be rack mounted:

1.Remove the four screws (5, Fig. 3-1) holding the four rubber feet to the bridge. This frees the top plastic housing (1) from the bridge.

2.Carefully remove the top plastic housing.

3.Remove the four screws (6) holding the bottom plastic housing (4) to the bridge’s chassis.

1.	Top Housing	5.	Screws (4)
2.	Screws (4)	6.	Screws (4)
3.	Rack Mount Bracket	7.	Rack Mount Bracket

4.Bottom Plastic Housing

Figure 3-1 Rack Mount Brackets Installation

3-2