MAINTENANCE

PUMP DRAIN PLUG LOCATION

DRAIN

PLUG

Front view of pump

5.Follow the instructions on page 12 to remove the float- ing weir, basket and filter cartridge. Insert a shop vacuum hose into the suction line located in the bottom of the filter compartment (operate in the blow mode). If the vacuum hose does not fit tight into the opening, air will escape. It might be necessary to wrap a rag around the vacuum hose to make an air-tight seal.

6.With the vacuum blowing into the opening of the filter compartment, note that air escapes through one of the suction openings in the footwell. Close this suction open- ing by installing a 1 1/2” NPT “freeze plug” (available from

a hardware store). Position all Power Diverters to “Combo” and operate the shop vacuum in blow mode to blow all of the water out of the jet lines supplied by the dual-speed pump.

7.Note that there are two other suction openings in the sides of the footwell. Remove the freeze plug used in the previous step and install it in one of these openings. Insert the vacuum hose into the other suction opening and blow the water out of the jet lines supplied by the single- speed pump.

8.Remove the freeze plug, replace the suction covers and reinstall the screws to secure the suction covers.

9.Use a wrench to remove the pump drain plugs located on the front of the pump housings. Allow all water to drain out, then replace the pump drain plugs.

NOTE: DO NOT LEAVE ANY WATER IN YOUR SPA.

WARNING: When not in use, the spa must be cov- ered with an insulating spa cover. Damage caused by either sun exposure or freezing is not covered under warranty.

DRAINING YOUR SPA

DRAIN CAP

DRAIN

HOSE

 

 

EQUIPMENT

 

 

COMPARTMENT

 

 

DOOR

GARDEN HOSE

 

 

 

 

 

1.Trip all GFCI breakers in sub-panel, or main electrical panel.

2.Remove the equipment compartment access door.

3.Locate the end of the drain hose and lift

it above the water level. (Requires clipping plastic tie the

first time.)

4.Unscrew and remove the drain cap.

5.Attach drain hose to a garden hose and direct to an appropriate draining area, keeping the hose below the water line.

6.After your spa is empty, clean the shell and filter cartridge. See “IMPOR-

TANT MAINTENANCE PROCEDURES” on page 10.

7.After cleaning, remove garden hose, replace drain cap and put drain hose back in equipment compartment.

8.Follow the “START-UP INSTRUCTIONS” on page 5 to refill your spa.

Page 14

Page 15 Page 17
Page 16
Image 16
Caldera Paradise Series owner manual Pump Drain Plug Location, Draining Your SPA
Page 15 Page 17

Paradise Series specifications

The Caldera Paradise Series represents a prestigious line of hot tubs designed to deliver unparalleled relaxation and therapeutic benefits. These models cater to both aesthetics and functionality, ensuring that every soak is a luxurious experience.

One of the defining features of the Paradise Series is its innovative Hydrotherapy system. Each hot tub is equipped with strategically placed jets that provide targeted massages, designed to relieve tension and promote relaxation in sore muscles. With multiple jet configurations, users can customize their experience, selecting from gentle flow to powerful jets depending on their preference.

Energy efficiency is a hallmark of the Caldera Paradise Series. These hot tubs come with advanced insulation technology, significantly reducing energy consumption while maintaining optimal water temperature. The EnergySmart system is an intelligent feature that uses a combination of insulation and temperature management to keep operational costs low, allowing for guilt-free enjoyment.

Another standout characteristic is the advanced water management system. The Paradise Series incorporates a complete filtration and sanitation system that ensures crystal-clear water with minimal maintenance. The system includes features such as a robust four-stage filtration process, which effectively removes contaminants and enhances water quality. Users can enjoy peace of mind knowing that their hot tub water is clean and safe.

The design of the Paradise Series is as much about aesthetics as it is about performance. With a variety of stylish options, including a selection of cabinet colors and shell designs, consumers can find a model that complements their outdoor space. The ergonomic seating is designed for comfort, and the spacious layout accommodates multiple users, making it perfect for social gatherings or family relaxation.

Moreover, Caldera employs top-grade materials for durability and longevity. Each hot tub is built with a robust structure that withstands the elements, ensuring that it remains a fixture of enjoyment for years to come.

For tech-savvy users, the Paradise Series offers integrated smart technology. Features like the Caldera mobile app allow for convenient control over the hot tub settings, including temperature adjustments and lighting preferences, all from a smartphone or tablet.

In summary, the Caldera Paradise Series embodies the ultimate fusion of innovation, comfort, and style. With advanced hydrotherapy options, energy efficiency, superior water management systems, and customizable aesthetics, these hot tubs are crafted to enhance well-being and provide a serene escape right in your backyard.
Top Page Image Contents