Step 3 - Continued
Inside View
Fig. 3A |
•From the inside of the grill, secure Body to Pedestal using 4 M6 X 15 screws through the holes as shown above in Fig. A, securing with 4 M6 nuts from below as shown to the right in Fig. B.
Caution:
Do not leave grill unattended until
bolts are secured.
M6 X 15mm (Item 37) | M6 Nut (Item29) |
Actual Size 4 Pcs. | Actual Size 4 Pcs. |
Fig. 3B
STEP 4 - Install Heat Shield
WARNING!
The Heat Shield must be installed to protect the Cylinder and regulator Hose from the high temperatures of the grill.
•Bend HeatShield (Item 21) upward at sides as shown and insert tabs down into the slots located in the top of the pedestal. Heat shield should then return to flat, horizontal position.
9
