Step, Assemble the Grill Body | Calphalon 8353 specs

Step 2 - Continued

•Attach Cylinder Retaining Wire (Item 26) through hole in back of Pedestal as shown in detail.

STEP 3 - Assemble the Grill Body

•CAUTION: TWO PEOPLE REQUIRED!

•Make sure contents of grill have been removed for easy lifting.

•Place Body on Pedestal.

•Note: The Regulator and Hose should be hanging down inside the pedestal.

•Carefully Open Hood

Caution:

Do not leave grill unattended until

bolts are secured.

8

Image 8

Calphalon 8353 owner manual Step, Assemble the Grill Body, Do not leave grill unattended until Bolts are secured

Contents

For Your Safety Use Care Manual Important Safeguards Never use the grill without the Grease Tray in place Assembly Instructions IMPORTANT! Please Read TM Calphalon Grill Parts List Assembly Instructions Unpacking the Grill Assemble the Pedestal Do not leave grill unattended until Bolts are secured StepAssemble the Grill Body Install Heat Shield Install Grease Tray Assemble Handle and Side Tables Assemble Side Tables Install Burners Adjust Tab if greater than 3/16 Install Ceramic Briquette TRAYS/ Cooking Grids Attach LP Cylinder to Grill How to perform a leak test View a LP Gas Cylinder Connecting/ Disconnecting LP Gas Cylinder to GrillGAS, CYLINDER, Hose Regulator Information Selecting a Location Before Using Your LP GAS GrillPrecautions LeakTesting Operating the LP GAS Grill Confirm each burner is lit before lighting another burner Lighting the Grill Using the Integral Ignition SystemPreparation Before Cooking Manual Lighting of the Grill Care and Maintenance Check Your Flame End of Cooking SessionTurn off Your LP Gas Grill Grill Cooking Porcelain coated Cooking Surfaces Burner MaintenanceHow to clean porcelain coated cast iron burners Possible Cause Solution Problem Using the igniterUsing a match Burners will not light Problem Possible Cause Solution Flames blow out Important Notice LP not Supplied with Grill Limited Warranty Calphalon Grill