Front panel controls
1
Standby / On | 2 |
1Standby/On
Switches the unit between Standby mode (indicated by a dim power LED) and On (indicated by a bright power LED). Standby is a low power mode where the power consumption is less than 10 Watts. The unit should be left in Standby mode when not in use.
2IR sensor
Receives IR commands from the supplied Azur remote control. A clear unobstructed line of sight between the remote control and the sensor is required.
3Display
Used to display the 540D V2’s functions and playback state etc. Please refer to the following ‘Front Panel Display’ section for more information.
4Disc tray
DVD/Compact Disc tray. Use the Open/Close button to activate.
5Open/Close
Allows you to open and close the disc tray for loading of discs. Pressing Play will also close the tray and start playing a disc if one is loaded.
6Play/Pause
Plays the disc and pauses (freezes) play when playing.
7Stop
Press once to stop playback. Pressing Play will cause the playback be re- started from the same position. Press again to fully stop playback.
8Skip
Press once to skip between tracks/chapters.
|
|
| azur 540D |
4 |
|
| DVD Player |
|
|
| |
Open | Play |
|
|
Close | Pause | Stop | Skip |
3 |
|
|
|
5 | 6 | 7 | 8 |
Front panel display
1 | 2 | 3 | 4 | 5 | 6 |
8 | 7 |
1Title/Chapter
Indicates the chapter title and chapter number fields.
2Video format
Displays the video output format: NTSC or PAL.
3Time
Shows the hour, minutes and seconds elapsed on the disc.
4MP4
Indicates a DivX/MP4 encoded disc is playing.
5Decoding mode indicators
Indicate when a Dolby Digital soundtrack is being played back (either decoded internally or output digitally for external decoding) or DTS soundtrack (for external decoding only).
6Repeat
Shows when Repeat ( 
), Repeat All ( 
) and 
) functions are in use.
7Playback
Shows when the disc is being played or paused.
8Main information display
Used to display the various functions of the unit.
6
