Cambridge Audio 80 Series manual Connection to a Progressive Scan TV/DISPLAY

85/86/89 DVD player

CONNECTION TO A PROGRESSIVE SCAN TV/DISPLAY

Some televisions and monitors are equipped with component video inputs and are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view higher quality pictures with less flicker.

To enable progressive scan via the component output please refer to	Y Pr Pb
page 13 under general setup to explain how to access this in the menu.
	Rear Panel

If you find that you have no display but are getting sound from your speakers, you have set the DVD player to progressive scan mode. Simply press the I-Scan button on your remote control.

Note: TV set with progressive-scan

video input

Audio In

Audio Cord

If your progressive scan TV has Y, Pb Pr video inputs you can use the players Y, Cb/Pb, Cr/Pr outputs . Press the P-Scan button to switch the player to the progressive scan video output mode.

If this player’s audio outputs are also connected to the TV, the L/R channels of 2-CH OUT should be connected to the TV’s AUDIO IN terminals.

It is imperative that you use high quality component video cables to ensure the best possible performance.

80 series DVD player 19