Cambridge Audio SR10 user manual Speaker B connections, Bi-wire connections

SR10

Speaker B connections	Either A or B, or both A and B may be selected for use.
The Speaker B connections on the back of the amplifier allow for a second	Note: When using two pairs of speakers, use speakers with a nominal
set of speakers to be used (i.e. speakers located in another room).	impedance of 8 ohms each.
The Speaker A/B button on the front panel and remote control allows the
two sets of speakers to be toggled on and off. Refer to the Front Panel or
Remote Control section of this manual for more information on the
Speaker A/B operation.

ENGLISH

SR10

Manufactured in an	FM 75Ω	AM 300Ω	Service Port
ISO9001 approved facility

Ground

Speaker A

Main Room

	4–
Right	Left

Mains Voltage Selector Switch 115V/230V AC~50/60Hz

				A
CD	DVD / BD	Aux / MP3	Phono MM	Out Rec
Left				Left
				B
Right				Right
CD	BD / DVD	MP3 / Aux	MM Phono	Right	Left
				Rec Out

A

Power AC

B

Bi-wire connections

Speaker B

Room Two

Note:

If your loudspeakers are equipped with two sets of terminals, then it is possible to connect them in the bi-wire configuration. Bi-wiring sends the bass and treble frequencies down separate speaker cables, resulting in a clearer, more focussed sound.

–Speaker A and B must both be selected for this type of connection to work.

–Remove the bi-wire link on the speaker terminals before connecting. Refer to your speakers’ manual for more information.

Black Red

Right speaker

HF	HF
LF	LF

Red Black Black Red

	4–8
Right	Left

A A

Black Red

Left speaker

HF	HF
LF	LF

B	B
Right	Left

Black Red Black Red

9