Additional Safety Advice
1)Keep surrounding objects at least four inches away from the apparatus for adequate ventilation.
2)Ventilation openings on the apparatus should not be impeded by such items as newspaper, cloths, curtains, and the like.
3)Do not place naked flame sources near the appara- tus, such as lighted candles.
4)Dispose of the battery in accordance with local safety regulations.
5)Do not operate the apparatus at a temperature less than 36˚ F/ 2˚ C or greater than 100˚ F/38˚ C.
CAUTION
•DO NOT REMOVE THE EXTERNAL ENCLOSURE PARTS TO EXPOSE THE ELECTRONICS. NO USER SERVICE- ABLE PARTS ARE INSIDE.
•IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT CREATIVE LABS NORTH AMERICA OR CREATIVE LABS EUROPE FOR A SERV- ICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
For CANADA
AC POWER CORD CONNECTION CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Pour le CANADA
CORDE DE CONNEXION CA ATTENTION:
POUR EVITER LES CHOCS ELECTRICQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSET JUSQU’AU FOND.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FCC STATEMENT FOR THE U. S. A. This equipment has been tested and found to comply with the limits of part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in- stalled and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the equipment and/or the receiving antenna.
•Increase the separation between the equip- ment and receiver.
•Connect the equipment to an AC outlet of a different mains circuit from the mains circuit/ outlet providing power to the receiver.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications to this equipment not ex- pressly approved by Creative Labs or Cambridge Sound- Works for compliance will void the user’s warranty.
