Operating Instructions | Oil Lubricated Portable Air Compressor |
|
|
Maintenance (Cont.)
To reset, turn unit off, wait until unit cools, and push button on the side of the motor cover.
If thermal overload protector shuts motor OFF frequently look for the following causes.
1.Low voltage.
2.Wrong gauge wire or length of extension cord.
3.Low oil level (pump may be permanently damaged).
4.Defective capacitor or motor.
5.Lack of proper ventilation.
| The motor must be |
! CAUTION | allowed to cool |
down before reset is possible.
STORAGE
1.When not in use, store hose and compressor in a cool dry place.
2.Drain tank of moisture.
3.Disconnect hose and hang open ends down to allow any moisture to drain.
Notes
www.chpower.com
6
