Campbell Hausfeld CHN10610, IN734500AV (Continued), Tool Components and Specifications, Important Safety Instructions

Operating Instructions

Important Safety Instructions		c..	Keep bystanders, children, and		e..	Use safety equipment. A dust mask,
(Continued)			visitors away while operating the			non-skid safety shoes and a hard
General			tool. Distractions are able to result in			hat must be used for the applicable
			the loss of control of the tool..			conditions..
a..	To reduce the risks of
					f..	Always wear eye
	electric shock, fire, and	Personal Safety
	injury to persons, read all	a..	Stay alert. Watch what you are			protection.
					g..	Always wear hearing
	the instructions before		doing and use common sense
	using the tool.		when operating the tool. Do not			protection when using
						the tool. Prolonged
b.	Be thoroughly familiar with the		use the tool while tired or under
	controls and the proper use of the		the influence of drugs, alcohol,			exposure to high intensity
	equipment.. Follow all instructions..		or medication. A moment of			noise is able to cause
	Contact your Campbell Hausfeld		inattention while operating the			hearing loss..
	representative if you have any		tool increases the risk of injury to		h..	Do not attach the hose or tool to
	questions..		persons..			your body. Attach the hose to the
c.	Only persons well acquainted with	b..	Dress properly. Do not wear loose			structure to reduce the risk of loss of
	these rules of safe operation should		clothing or jewelry. Contain long			balance if the hose shifts..
	be allowed to use the unit..		hair. Keep hair, clothing, and		i..	Always assume that the tool
	Read and		gloves away from moving parts.			contains fasteners. Do not point
	understand tool		Loose clothes, jewelry, or long			the tool toward yourself or anyone
labels and manual. Failure to follow			hair increases the risk of injury to			whether it contains fasteners or not..
warnings, dangers, and cautions could
			persons as a result of being caught		j.	Do not nail on
result in DEATH or SERIOUS INJURY.
			in moving parts..
Work Area						top of another
		c..	Avoid unintentional starting.			nail. This is able to cause the nail to
						be deflected and hit someone, or
a..	Keep the work area clean and well		Be sure the switch is off before
						cause the tool to react and result in a
	lighted. Cluttered benches and dark		connecting to the air supply. Do not
						risk of injury to persons.
	areas increase the risks of electric		carry the tool with your finger on		k..	Remove finger
	shock, fire, and injury to persons..		the switch or connect the tool to th
						from the trigger
			air supply with the switch on..
b..	Do not operate the tool					when not driving fasteners. Never
	in explosive atmospheres,	d..	Do not overreach. Keep proper			carry the tool with finger on trigger,
	such as in the presence		footing and balance at all times.			the tool is able to fire a fastener.
						Activate the trigger lock when not in
	of flammable liquids,		Proper footing and balance enables
						use.
	gases, or dust. The tool is		better control of the tool in			Always remain in a
	able to create sparks resulting in the		unexpected situations..
						firmly balanced
	ignition of the dust or fumes..
					position when using or handling the
					tool.
Tool Components and Specifications				Adjustable Cap Exhaust
• Requires: 0..15 average SCFM with 10
	fasteners per minute @ 90 psi
• Air inlet: 1/4 inch NPT							Latch
• STAPLE SIZE RANGE: 1/4 inch to 9/16 inch						Trigger	Lever
• MAGAZINE CAPACITY: 100+ Arrow® T50® staples or						Lock
	equivalent (see Fastener Section)					Magazine
• WEIGHT: 2 lbs.., 1 oz..
• LENGTH: 8-1/2 inch
• HEIGHT: 5-5/8 inch			Trigger
• MAXIMUM PRESSURE: 100 psi			Fastener Discharge Area
• PRESSURE RANGE: 60 psi – 100 psi
www.chpower.com

2