Campbell Hausfeld PW1586 Assembly Instructions and Parts List, Garden Hose Connection, Power Cord

Assembly Instructions and Parts List		PW1586 & PW1587
	Garden Hose Connection
	Instructions	! IMPORTANT !
	1. Attach nipple adapter to inlet fitting
		This pressure washer is equipped with a
	on the unit (this may already be
	attached to the pump).	microswitch sensitive to water flow. This
	2. Attach quick connect fitting to	Instant Start/Stop switch (ISS) senses
		water flow in the pump. When the trig-
	garden hose.
		ger is released, water stops flowing
	3. Pull side “A” of quick connect fitting
		through the pump. The ISS then auto-
	toward garden hose and push onto
		matically turns the motor off to protect
	nipple adapter.
		pump from overheating.
	4. Push side “A” of quick connect fitting
		OPERATION
	towards nipple adapter and release.
		1. Pull trigger on gun.
	Figure 2 - Garden Hose Connection	2. Turn the “ON/OFF” switch to “ON”.

Instrucciones de Montaje y Lista de Piezas PW1586 & PW1587

Para ordenar repuestos, sírvase llamer al 1-800-330-0712 (En los Estados Unidos, o llame a su distribuidor local)

Sírvase proporcionar la siguiente información:		Dirija toda la correspondencia a:
-Número de modelo		Campbell Hausfeld
-Número de serie (si lo hubiera)		Attn: Customer Service
-Descripción y número del repuesto, según se		100 Mundy Memorial Drive
indica en la lista de repuestos.		Mt. Juliet, TN 37122 U.S.A.
		12
4	2	20
14

13

	"A"	Quick Connect Fitting	3.	Release trigger. The pressure washer
				motor will stop running.
		Garden Hose	4.	To spray again, pull trigger and motor
				and pump will restart.
Nipple			Note: Occasionally the motor may run
Adapter			for a short time to bring fresh, cool

5 3 6

7

1	15
18	19
	9
16	8
17

11

	water into the pump even if trigger is
	released. This is part of normal operation
Power Cord	and will not damage the unit.
				Always turn the
1. Plug the power cord into a grounded		!	CAUTION	“ON/OFF” switch to “OFF” then
120V outlet and press the reset	trigger gun to release hose pressure before unplug-
	ging power cord.
button as shown in Figure 3.				Risk of equipment dam-
2. THIS MUST BE DONE EACH TIME THE		! CAUTION		age. Always make sure the
	“ON/OFF” switch on the unit is “OFF” and unit is
UNIT IS PLUGGED IN AN OUTLET.
	unplugged prior to storage.
				Risk of Injection.
Figure 3 - Grounded plug/reset button		! WARNING		Unit will start spraying when trig-
	ger is squeezed if on/off switch is in “ON” position.
Reset	Always point gun in safe direction.

Call 1-800-330-0712 for Technical Service

www.chpower.com

	8	9		13
			10
No. de			Número del
Ref.	Descripción		Repuesto	Ctd.
1	Lanza regulable		PM257000SV	1
2	Lanza turbo		PM022621AV	1
3	Manguera		PM243700AV	1
4	Pistola		PM037203AV	1
5	Adaptador de manguito		PM022100AV	1
6	Conector rápido		PM020600SV	1
7	Limpiador de puntas		PM008500AV	1
8	Sujetador de rueda		PM342200SV	2
9	Rueda		PM342210SV	2
10	Soporte delantero		PM270040SV	1
11	Detergent bottle		PM270010SV	1
12	Mango		PM342230SV	1
13	Paquete de hardware		PM343900SV	1
14	Anillo en O		PM232200SV	1
15	Tapa del tanque de agua		PM060000SV	1
16	Cepillo de cerdas de nylon		PM343905SV	2
17	Cepillo de cerdas de bronce		PM343910SV	2
18	Cepillo triangular		PM343915SV	1
19	Paño para el cepillo triangular		PM343920SV	1
20	Boquilla de la limpiadora a vapor		PM343925SV	1

2 15 Sp