6Print.
zzPress the <p> button to start printing.
zzWhile printing, paper passes in and out of the back of SELPHY several times. Do not touch the paper until printing is finished and the print is ejected onto the paper cassette.
zzDo not allow 19 or more prints to collect in the ejection area on the paper cassette.
zzTo cancel printing in progress, always press the <v> button.
7Add more paper as needed.
zzIf a message indicates that the paper has run out, remove the paper cassette without turning off the power.
zzAdd more paper to the cassette (=9) and reinsert the cassette in SELPHY (=10).
8Change the ink cassette as needed.
zzIf a message indicates that the ink has run out, open the ink cassette compartment cover without turning off the power.
zzTo remove the ink cassette, move the lock in the direction shown. Insert a new ink cassette (=8, 10).
•Never pull out the paper cassette, open the ink cassette compartment cover, or remove a memory card while printing or when you hear printer operation sounds immediately after it has been turned on. This may damage the printer.
•To cancel printing in progress, always press the <v> button. Printing cannot be canceled by pressing the <q> button, and unplugging the printer may damage it.
•Image display in step 4 may take some time when memory cards contain many images.
•If a message indicates that DPOF images remain, see “Printing Using Camera Settings (DPOF Print)” (=52).
•You can specify up to 99 images in step 4 and up to 99 prints per image in step 5. However, the total number of prints cannot exceed 999.
•Even if you press the <v> button to cancel printing, the printer will continue printing until the current sheet is finished.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via
Printing via USB Cable
Troubleshooting
Appendix
15