Printing ID Photos

Images can be printed for use in photo identification. Choose from [Custom] or [Standard]* sizes.

Two different images can be printed on each sheet.

* The dimensions of [Standard] conform to ICAO international standards.

1 Specify ID photo printing.

zzPress the <k> button.

zzPress the <u><d> buttons to select [ID Photo], and then press the <o> button.

2Specify the finished size of the photo.

zzPress the <l><r> buttons to specify how the size is determined.

zz[Custom]: Press the <u><d> buttons to select [Long Side], and then press the <l><r> buttons to specify the length. Specify the [Short Side] length, and then press the <o> button again. Note that options available for [Short Side] are automatically updated based on the [Long Side] length.

zz[Standard]: Check the indicated image size and press the <o> button.

3Choose an image to print.

zzPress the <l><r> buttons to select an image, and then press the <u> button. is shown in the lower right. You can choose one or two images.

zzTo specify the cropping area (=20), press the EDIT button.

zzPrint as described in step 6 of “Printing Images” (=15).

zzSettings are cleared after printing.

•The photo may not be accepted as an official ID photo, depending on the intended purpose. For details, contact the institution that requires the photo.

•Card-size paper cannot be used.

•[Borders] settings are not applied, and dates are not printed.

•Selecting two images in step 3 will produce an equal number of prints of each image per sheet, in your specified layout. Note that for layouts with an odd number of prints per sheet, the center frame on the sheet will be blank.

Cover

Contents

Part Names

Basic Operations

Print Settings

Printing via Wi-Fi

Printing via USB Cable

Troubleshooting

Appendix

21