•Printing in progress cannot be canceled from SELPHY by using the

<v> button. To cancel printing, use the computer to delete the print job.

•The printer may not work correctly if it is connected to a computer via a USB hub.

•The printer may not work correctly if USB devices other than a USB mouse or keyboard are used at the same time. In this case, disconnect the other USB devices and reconnect the printer.

•Avoid allowing your computer to enter sleep or standby mode while the printer is connected via USB. If the computer enters standby mode with the printer connected via USB, wake the computer without disconnecting the USB cable. If recovery fails, restart the computer.

•For computer or photo software instructions, refer to the relevant user manual.

•If an error message is displayed on SELPHY, also check for any error messages displayed on the computer (in desktop mode). Messages will be automatically dismissed once you resolve the issue indicated.

•If a message is displayed on the computer, you can also click [Cancel] to cancel printing.

•Macintosh: If [Canon CP910] is not available as a destination printer, register the printer on the computer as follows.

Access [System Preferences] ► [Print & Scan] (or [Print & Fax]). Click [+] below the list.

Choose [Canon CP910]. Click [Add].

Cover

Contents

Part Names

Basic Operations

Print Settings

Printing via Wi-Fi

Printing via USB Cable

Troubleshooting

Appendix

51