2Choose auto or manual IP address configuration.

zzFor automatic IP address configuration, choose [Auto] and press the <o> button. Setup is now finished.

zzTo enter the IP address manually, choose [Manual] and press the <o> button. Go to step 3.

3Enter the IP address.

zzPress the <l><r> buttons to move the cursor, press the <u><d> buttons to specify the value, and then press the <o> button.

4 Enter the subnet mask.

zzPress the <l><r> buttons to move the cursor, press the <u><d> buttons to specify the value, and then press the <o> button.

5 Check the settings.

zzReview the indicated setting details and press the <o> button.

Returning the Wi-Fi Settings to Default

Reset Wi-Fi settings such as the printer name, access point information, and password as follows.

zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi Settings], and then press the <o> button.

zzPress the <u><d> buttons to select [Reset Settings], and then press the <o> button.

zzConfirm your intent by pressing the <o> button.

Entering Information

When entering a printer name, password, or other information, press the EDIT button to access the input screen.

Entering information

zzPress the <u><d><l><r> buttons to select a letter, number, or symbol, and then press the <o> button. To enter a space, select [Space] and press the <o> button.

Deleting information

zzPress the <u><d><l><r> buttons to select [ ], and then press the <o> button.

Switching input modes

zzTo switch from uppercase to lowercase letters and then symbols, press the EDIT button repeatedly.

Returning to the previous screen

zzTo confirm input and return to the previous screen, press the

<u><d><l><r> buttons to select [Finish], and then press the <o> button.

zzTo cancel input and return to the previous screen, press the <v> button.

Cover

Contents

Part Names

Basic Operations

Print Settings

Printing via Wi-Fi

Printing via USB Cable

Troubleshooting

Appendix

45