Power button board
Description | Spare part number |
|
|
Power button board (includes cable) | |
|
|
Before removing the power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 35).
5.Remove the following components:
a.Service door (see Service door on page 43).
b.Keyboard (see Keyboard on page 37)
c.Top cover (see Top cover on page 50)
Remove the power button board assembly:
1.Position the top cover
2.Disconnect the cable from the board (1).
3.Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the top cover.
60 | Chapter 6 Removal and replacement procedures for Authorized Service Provider parts |
