4.Follow the
5.To save your changes and exit, click the Save icon in the
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory settings.
Updating the BIOS
The next sections describe different ways of updating the BIOS.
Downloading SoftPaqs to update the BIOS
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
To install BIOS updates from the HP website, follow the steps below:
1.Download the SoftPaq from the HP website.
2.Click Run, and then follow the
NOTE: Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.
BIOS management using system diagnostics
1.Download the SoftPaq from the HP website.
NOTE: Verify that the UEFI system diagnostics is installed on your computer (or USB flash drive).
2.Click Run, and then click Cancel at the Update/USB bootable dialog box.
3.Navigate to the folder located in c:\swsetup that corresponds to your SoftPaq number.
4.Locate the .bin file in the ROMpaq folder (for example, 68CDD.bin) and then copy it to the
5.Locate the .sig file in the ROM.cab file and rename it with the same prefix as the .bin file (for example, 68CDD.sig). Copy the renamed file to the
6.Restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
7.Press f2 to enter Computer Setup.
8.Click BIOS Management from the menu and then select Update BIOS.
78 | Chapter 7 Computer Setup (BIOS) and Advanced System Diagnostics |
