HP 430 G1 E3U85UTABA, 430 G1 E3U87UTABA manual Heat sink, e. System board see System board on page

Heat sink

NOTE: The fan and heat sink are combined into one assembly. All fan/heat sink spare part kits contain replacement thermal material.

Description	Spare part number
Heat sink	727766-001

Before removing the heat sink, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 35).

5.Remove the following components:

a.Service door (see Service door on page 43).

b.Hard drive (see Hard drive on page 40)

c.Keyboard (see Keyboard on page 37)

d.Top cover (see Top cover on page 50)

e.System board (see System board on page 71)

Remove the heat sink:

1.Position the system board upside-down with the front toward you.

2.In the order indicated, loosen the 4 captive Phillips screws (1)-(4)that secure the heat sink to the system board.

3.Disconnect the fan cable (5) from the system board.

74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts