6Removal and replacement procedures for Authorized Service Provider parts

CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty.

Component replacement procedures

NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. See Service tag and PCID label on page 17 for details.

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

There are as many as 47 screws that must be removed, replaced, or loosened when servicing Authorized Service Provider only parts. Make special note of each screw size and location during removal and replacement.

Top cover

NOTE: All top cover spare part kits include a touchpad.

Description

Spare part number

 

 

Top cover for use in models with a fingerprint reader (includes touchpad)

727753-001

 

 

Top cover for use in models without a fingerprint reader (includes touchpad)

727754-001

 

 

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

50

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Page 60
Image 60
HP 430 G1 E3U85UTABA, 430 G1 E3U87UTABA, 430 G1 E3U93UTABA manual Component replacement procedures, Top cover