HP 430 G1 E3U93UTABA, 430 G1 E3U85UTABA manual Display assembly, Description Spare part Number

Display assembly

All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables.

Description	Spare part
	number
Display assembly for use in models without WWAN	727758-001
Display assembly for use in models with WWAN	731997-001

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 35).

5.Remove the following components:

a.Service door (see Service door on page 43).

b.WLAN module (see WLAN/Bluetooth combo card on page 48)

c.WWAN module (see WWAN module on page 46)

d.Keyboard (see Keyboard on page 37)

e.Top cover (see Top cover on page 50)

f.Power connector cable (see Power connector cable on page 70)

Remove the display assembly:

1.Position the computer upside down.

64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts