Dell E30S Installing a redundant AC power supply, Installing the power supply unit blank

Figure 50. Removing and installing an AC power supply unit
1.	release latch	2.	power supply unit cable connector
3.	power supply unit	4.	connector

5.power supply unit handle

Next steps

If you are not replacing the power supply unit in the second power supply unit bay immediately, install the power supply unit blank in the empty power supply unit bay.

Related Links

Installing the power supply unit blank

Installing a redundant AC power supply

Installing a redundant AC power supply

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Verify that both the power supply units are the same type and have the same maximum output power.

NOTE: The maximum output power (shown in watts) is listed on the power supply label.

3.If installed, remove the power supply unit blank.

120