Dell E30S owner manual Installing the cooling shroud

Steps

Holding the touch points, lift the cooling shroud from the system.

NOTE: Systems with x16 hard-drive backplanes use a different cooling shroud. To ensure proper cooling, always install the cooling shroud provided with your system.

Figure 17. Removing and installing the cooling shroud — 3.5 inch hard-drive system

1.	chassis intrusion switch	2. touch points (2)
3.	slots (2)	4. chassis intrusion-switch connector on
		the system board

Related Links

Installing the cooling shroud

Installing the cooling shroud

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

62