Dell E30S owner manual Diagnostic indicators, Setup menu, View menu

From the Home screen, press the Select button to enter the main menu.

Setup menu

NOTE: When you select an option in the Setup menu, you must confirm the option before proceeding to the next action.

Option	Description
iDRAC	Select DHCP or Static IP to configure the network mode. If Static IP is selected,
	the available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to
	enable DNS and to view domain addresses. Two separate DNS entries are available.
Set error	Select SEL to display LCD error messages in a format that matches the IPMI
	description in the SEL. This is useful when trying to match an LCD message with an
	SEL entry.
	Select Simple to display LCD error messages in a simplified user-friendly
	description. See the Dell Event and Error Messages Reference Guide at dell.com/
	esmmanuals for the list of messages in this format.
Set home	Select the default information to be displayed on the LCD Home screen. See View
	Menu to see the options and option items that can be set as the default on the
	Home screen.

View menu

NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.

Option	Description
iDRAC IP	Displays the IPv4 or IPv6 addresses for the iDRAC7. Addresses include DNS
	(Primary and Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).
MAC	Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name	Displays the name of the Host, Model, or User String for the system
Number	Displays the Asset tag or the Service tag for the system.
Power	Displays the power output of the system in BTU/hr or Watts. The display format can
	be configured in the Set home submenu of the Setup menu.
Temperature	Displays the temperature of the system in Celsius or Fahrenheit. The display format
	can be configured in the Set home submenu of the Setup menu.

Diagnostic indicators

The diagnostic indicators on the system front panel display error status during system startup.

NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a working power source and press the power button.

17