Dell E30S owner manual Installing a four-slot hard-drive blank

Steps

1.Using a screwdriver, push the release tabs on the four corners of the blank from inside the system, to unlock the four-slot hard-drive blank from the chassis.

2.From the front of the system, pull the four-slot hard-drive blank at the corners until it is free of the hard-drive slot.

Figure 33. Installing and removing the four-slot hard-drive blank

1.	four-slot hard-drive blank	2. release tab
3.	screwdriver

Related Links

Removing the cooling shroud

Removing the hard-drive backplane

Installing a four-slothard-drive blank

Installing a four-slot hard-drive blank

Prerequisites

Ensure that you read the Safety instructions.

Steps

1.Locate the hard drive slots numbered from four to seven.

2.Insert the four-slot hard-drive blank into the hard-drive slot, and push it until the release tabs click into place.

83