Dell E30S owner manual Installing the system feet

Figure 11. Removing and installing the system feet
1.	screw hole (4)	2.	slot (12)
3.	tab (12)	4.	base of the tower
5.	system feet (4)	6.	screw (4)

Related Links

Installing the system feet

Installing the system feet

Prerequisites

CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable foundation for the system. Failure to install the feet poses the risk of having the system tip over, possibly causing bodily injury or damage to the system.

1.Ensure that you read the Safety instructions.

2.Keep the #2 Phillips screwdriver ready.

3.Lay the system on its side on a flat and stable surface.

Steps

1.Align the three tabs on the system feet with the three slots on the base of the chassis.

2.Secure the system feet to the base of the chassis by using the screws.

52