Dell E30S owner manual Removing the VGA module, Installing the control panel assembly cover

3.Install the control panel assembly.

4.Connect the control panel cable, the LCD cable and the control panel USB cable to the system board.

5.Follow the procedure listed in After working inside your system.

Related Links

Installing the control panel assembly cover

Installing the control panel assembly

Removing the LCD module

Removing the VGA module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the control panel assembly.

4.Remove the control panel assembly cover.

Steps

Release the hooks securing the VGA module to the control panel board and remove the VGA module.

Figure 63. Removing and installing the VGA module
1.	VGA module	2. control panel
3.	hook (2)	4. VGA connector on the control panel
		board

Related Links

Removing the control panel assembly

138