Dell E30S System battery, Replacing the system battery, Removing the power interposer board

Next steps

1.Install the cooling shroud.

2.Install the power supply module(s) or power supply blank in their original locations.

3.Follow the procedure listed in After working inside your system.

Related Links

Installing the cooling shroud

Installing a redundant AC power supply

Removing the power interposer board

System battery

Replacing the system battery

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud.

WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. See your safety information for additional information.

Steps

1.Locate the battery socket. For more information, see System board connectors.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.

2.To eject the battery, press firmly on the edge of the positive side of the battery in the direction of the arrow as shown in the illustration below.

128