Dell E30S Internal SD card, Installing the internal dual SD module, Removing an internal SD card

Convention	IDSDM indicator code	Condition
E	Not lit	Indicates that the card is missing or is booting

Next steps

Follow the procedure listed in After working inside your system.

Related Links

Removing the cooling shroud

Removing an internal SD card

Installing the internal dual SD module

Installing the internal dual SD module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

Steps

1.Locate the IDSDM connector on the system board.

2.Align the connectors on the system board and the dual SD module.

3.Push the dual SD module until it is firmly seated on the system board.

Next steps

1.Install the SD vFlash media card(s).

2.Install the cooling shroud.

3.Follow the procedure listed in After working inside your system.

Related Links

Installing an internal SD card

Installing the cooling shroud

Removing the internal dual SD module

Internal SD card

Removing an internal SD card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

110