Dell E30S owner manual Internal dual SD module, Removing the internal dual SD module

Internal dual SD module

The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:

•Dual card operation — maintains a mirrored configuration using SD cards in both slots and provides redundancy.

NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information is replicated from one SD card to another.

•Single card operation — single card operation is supported, but without redundancy.

Removing the internal dual SD module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud.

Steps

1.Locate the internal dual SD module on the system board.

2.If installed, remove the SD card(s).

3.Hold the plastic pull tab and pull the dual SD module out of the system.

108