Dell E30S owner manual Boot Settings screen, Network Settings screen

Menu Item	Description
Drive Type	Displays the type of drive attached to the SATA port.
Capacity	Displays the total capacity of the hard drive. The field is undefined for
	removable media devices such as optical drives.

Boot Settings screen

You can use the Boot Settings screen to set the Boot mode to either BIOS or UEFI. It also allows you to specify the boot order.

To view the Boot Settings screen click System Setup Main Menu → System BIOS → Boot Settings.

Menu Item	Description
Boot Mode	Enables you to set the boot mode of the system.
	CAUTION: Switching the boot mode may prevent the system from
	booting if the operating system is not installed in the same boot
	mode.
	NOTE: Setting this field to UEFI disables the BIOS Boot Settings
	menu. Setting this field to BIOS disables the UEFI Boot Settings
	menu.
	If the operating system supports UEFI, you can set this option to UEFI.
	Setting this field to BIOS allows compatibility with non-UEFI operating
	systems. By default, the Boot Mode option is set to BIOS.
Boot Sequence Retry	Enables or disables the Boot Sequence Retry feature. If this field is
	enabled and the system fails to boot, the system reattempts the boot
	sequence after 30 seconds. By default, the Boot Sequence Retry option
	is set to Enabled.
Hard-Disk Failover	Specifies which devices in the Hard-Disk Drive Sequence are attempted
	in the boot sequence. When the option is Disabled, only the first hard
	disk device in the list is attempted to boot. When set to Enabled, all hard
	disk devices are attempted in order, as listed in the Hard-Disk Drive
	Sequence. This option is not enabled for UEFI Boot Mode.
Boot Option Settings	Configures the boot sequence and the boot devices.

Network Settings screen

You can use the Network Settings screen to modify PXE device settings. Network Settings are only available in UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For BIOS boot mode, the network settings are handled by the network controllers option ROM.

To view the Network Settings click System Setup Main Menu → System BIOS → Network Settings.

Menu Item	Description
PXE Device n (n = 1 to 4)	Enables or disables the device. When enabled, a UEFI boot option is
	created for the device.

PXE Device n Settings (n = 1 Allows you to control the configuration of the PXE device. to 4)

37