Dell E30S owner manual Removing memory modules

System	DIMM Size (in	Number of	DIMM Rank,	DIMM Slot Population
Capacity (in	GB)	DIMMs	Organization, and
GB)			Frequency
			2R, x8, 1866 MT/s	NOTE: 16 GB DIMMs must
				be installed in slots
				numbered A1, A2, A3, A4,
				B1, B2, B3, and B4 and 8
				GB DIMMs must be
				installed in slots A5, A6, A7,
				and A8.
192	16	12	2R, x4, 2133 MT/s,	A1, A2, A3, A4, A5, A6,A7,A8, B1,
			2R, x4, 1866 MT/s	B2, B3, B4
384	32	12	RDIMM, 2R, x4, 2133 A1, A2, A3, A4, A5, A6,A7,A8, B1,
			MT/s	B2, B3, B4

RDIMM, 2R, x4, 1866

MT/s

Removing memory modules

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud.

WARNING: The memory modules are hot to the touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or metallic contacts on the memory module.

Steps

1.Locate the appropriate memory module socket.

CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of the memory module or metallic contacts.

2.To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory-module socket.

89