Dell E30S owner manual System board, Installing the VGA module, Removing the system board

Removing the control panel assembly cover

Installing the VGA module

Installing the VGA module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Ensure that you read the Safety instructions.

Steps

1.Align the slots on the VGA module with the VGA connector and hooks on the control panel board.

2.Press down on the VGA module until the hooks snap into place.

3.Install the control panel assembly cover.

4.Install the control panel.

Next steps

1.Install the control panel assembly cover.

2.Install the control panel assembly.

3.Follow the procedure listed in After working inside your system.

Related Links

Installing the control panel assembly cover

Installing the control panel assembly

Preparing a system for conversion from tower mode to rack mode

Removing the VGA module

System board

Removing the system board

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Keep the #2 Phillips screwdriver ready.

3.Follow the procedure listed in Before working inside your system.

139