Dell E30S owner manual Installing the internal cooling fan

Figure 37. Removing and installing the internal cooling fan

1.	internal cooling fan power cable	2.	release tab
3.	arrow	4.	internal cooling fan

Related Links

Removing the cooling shroud

Installing the internal cooling fan

Installing the internal cooling fan

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: Do not operate the system with the cover removed for a duration exceeding 5 minutes.

Ensure that you read the Safety instructions.

Steps

1.Hold the cooling fan by the sides with the cable end facing the bottom of the chassis.

CAUTION: Do not remove or install the internal cooling fan by holding the fan blades.

2.Align the four tabs on the internal cooling fan with the four slots on the chassis wall.

3.Press and slide the internal cooling fan into the slots until the release tab locks into place.

93