Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame to check the focus.
Touch l to switch the focus check display (p. 44).
XA white frame will appear where the AF frame was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
zTouch the lower right image, or move the
zoom lever toward k once.
XThe screen shown on the left will appear. z Touch 
to move to a different frame
when multiple frames appear.
Change the magnification level or location.
zMoving the zoom lever, or touching the magnified image on the lower right of the
screen, or 
will change the displayed magnification rate.
zIf you drag across the image on the lower right, you can move the location of the displayed area.
zTouching Ú, or the image in the upper left resets the display to Step 1.
The focus check display is not available for movies.
126
