Adding Effects and Shooting
Color Swap
You can swap one color in an image for another when recording it. You can only swap one color.
Choose Y.
zFollow Steps 1 – 2 on p. 64 to choose Y.
Touch 
.
XThe unchanged image and the Color Swap image will alternately display.
zThe default setting is to change green to gray.
Specify the color to be swapped.
zPosition the center frame so it is filled with
the color you want and touch the left frame that appears in the lower left of the screen.
X The specified color will be recorded.
Specify the target color.
zPosition the center frame so it is filled with
the color you want and touch the right frame that appears in the lower left of the screen.
XThe specified color will be recorded.
Specify the range of colors to be swapped.
zTouch op to change the range of colors to be retained.
zChoose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors.
zTouching Ú restores the shooting screen.
73
