F: Bulb Exposures

When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.

1

2 3

Elapsed exposure time

Set the Mode Dial to <F>.

Set the desired aperture.

While looking at the LCD panel, turn the <6> or <5> dial.

Take the picture.

While you hold down the shutter button, the exposure will continue.

XThe elapsed exposure time will be displayed on the LCD panel.

Since bulb exposures produce more noise than usual, the image might look a little grainy.

When [8C.Fn II -1: Long exp. noise reduction] is set to [1: Auto] or

[2: On], noise generated by the bulb exposure can be reduced (p.208).

For bulb exposures, using the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) is recommended.

You can also use a remote controller (sold separately, p.110) for bulb exposures. When you press the remote controller’s transmit button, the bulb exposure will start immediately or 2 sec. later. Press the button again to stop the bulb exposure.

107