3Manual Sensor CleaningN

Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.

The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

1

2

3

Select [Sensor cleaning].

Under the [6] tab, select [Sensor cleaning], then press <0>.

Select [Clean manually].

Turn the <5> dial to select [Clean manually], then press <0>.

Select [OK].

Turn the <5> dial to select [OK], then press <0>.

XIn a moment, the reflex mirror will lockup and the shutter will open. “CLn” will blink on the LCD panel.

4End the cleaning.

Set the power switch to <2>.

As the power source, using the AC Adapter Kit ACK-E6 (sold separately) is recommended.

If you use the battery, make sure it is fully recharged. If a battery grip with size-AA/LR6 batteries is attached, manual sensor cleaning will not be possible.

187