1Fully Automatic Shooting

1

Area AF frame 2

Set the Mode Dial to <1>.

Aim the Area AF frame over the target subject.

All the AF points will be used to focus, and generally the closest object will be focused.

Aiming the center of the Area AF frame over the subject will make focusing easier.

3

Focus confirmation light

Focus the subject.

Press the shutter button halfway, and the lens focusing ring will rotate to focus.

XThe AF point(s) which achieve(s) focus will be displayed. At the same time, the beeper will sound and the focus confirmation light <o> in the viewfinder will light.

XUnder low-light conditions, the viewfinder will flash in red to illuminate the AF point.

XIf necessary, the built-in flash will pop- up automatically.

4 Take the picture.

Press the shutter button completely to take the picture.

X The captured image will be displayed for about 2 sec. on the LCD monitor. If the built-in flash has popped up, you can push it back down with your fingers.

50