SSelecting the AF AreaN

Default AF Area Selection Modes

As default setting, the following three AF area selection modes can be selected. See the next page for the selection procedure.

Single-point AF (Manual selection) (p.89)

Select one AF point to focus.

Zone AF (Manual selection of a zone) (p.90) The 19 AF points are divided into five zones for focusing.

Auto select 19-point AF (p.90)

AF Area Selection Modes Added with Custom Functions

AllCOPYthe AF points are used to focus. Set in fully- automatic modes (1/ ).

With [8C.Fn III -6: Select AF area selec. mode] (p.212), the following two AF area selection modes can be added.

Spot AF (Manual selection) (p.89)

For pinpoint focusing.

AF point expansion (Manual selection) (p.89)

The manually-selected AF point <S> and adjacent

AF points <w> are used to focus.

87