Using Wireless FlashN
[1 (A:B C)] Multiple slave units in multiple groups
C | Approx. 10m | |
| (32.8ft.) | |
Indoors A | Approx. 7m | Approx. |
(23.0ft.) | B 7m | |
|
| (23.0ft.) |
Outdoors | 80o | Approx. |
|
| 5m (16.4ft.) |
This is a variant of the [1 (A:B)] setup on the preceding page. This setup has group C eliminate the shadows created by groups A and B. Refer to your Speedlite’s instruction manual to set the slave ID of the three slave units to A (Group A), B (Group B), and C (Group C) and position them as shown in the illustration.
1Set [Firing group] to [1 (A:B C)].
2Set the desired flash ratio and shoot.
Select [A:B fire ratio] and set the flash ratio.
Set flash exposure compensation for group C as necessary.
If [Firing group] is set to [1 (A:B)], group C will not fire.
If group C is pointed toward the main subject, overexposure may result.
125