Using a Household Power Source

1.

Turn the POWER switch to OFF.

 

 

2.

Connect the power cord to the

 

 

 

power adapter.

q

 

3.

Plug the power cord into a power

 

r

 

outlet.

 

 

 

 

4.

Connect the power adapter to the

 

 

 

camcorder’s DC IN terminal.

e

 

 

 

w

 

 

 

Turn off the camcorder before connecting or disconnecting the power adapter.

If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from the TV or the antenna cable.

Do not connect any products that are not expressly recommended to the camcorder’s DC IN terminal or to the power adapter.

You may hear some noise from the power adapter during use. This is not a malfunction.

Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.

When the power adapter or battery pack is defective, the CHARGE indicator

flashes rapidly (at about 2 flashes/second) and charging stops.

The CHARGE indicator informs you about the charge status.

0-50%:Flashes once every second

More than 50%: Flashes twice every second

100%:

Glows steadily

Charging, Recording and Playback Times

Below times are approximate and vary according to the charging, recording or playback conditions.

 

 

NB-2LH

NB-2L

BP-2L12

BP-2L14

Charging Time

 

115 min.

110 min.

180 min.

210 min.

Max. Recording

Viewfinder

90 min.

70 min.

145 min.

185 min.

Time

LCD

75 min.

55 min.

120 min.

155 min.

Typical Recording

Viewfinder

50 min.

40 min.

80 min.

100 min.

Time*

LCD

40 min.

30 min.

70 min.

85 min.

Playback Time

 

105 min.

85 min.

175 min.

220 min.

*Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter.

14