You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.
CAMERA | PLAY (VCR) | CARD CAMERA | CARD PLAY |
AUDIO SETUP | 12bit AUDIO•••STEREO1 | ||
( | 37) |
1.Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.
•STEREO1: Plays back the original sound.
•STEREO2: Plays back the added sound.
•MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.
•MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2.If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2.
❍The camcorder resets to [STEREO1] when you turn the camcorder off. However,
the mix balance is memorized by the camcorder.
❍You can also press the 12bit AUDIO OUT button on the wireless controller to select the audio output. However, the mix balance can only be adjusted in the menu.
E
Editing
91