Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

H (phones) terminal

Speaker

SET dial

When Using Headphones

The headphones terminal also serves as AV terminal. Headphones can only be used when “H” is displayed on the screen. If not, change the setting following the procedure below.

CAMERA

PLAY (VCR)

 

 

CARD CAMERA

CARD PLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR SETUP

 

 

 

AV/PHONES

••AV

(

37)

Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H] and close the menu.

❍The speaker does not sound when “H” is displayed.

❍Do not connect headphones unless “H” is displayed as it produces noise.

Adjusting the Volume

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

Turn the SET dial up to increase the volume, and down to lower the volume.

• A volume bar appears for 2 seconds.

• You can turn off the volume completely by turning the SET dial

down until [OFF] appears. Turn the SET dial up to increase the volume again.

E

Playback

Functions Basic

 

-

33