Message

Explanation

 

 

 

 

 

CANNOT TRIM

You attempted to trim an image with an image size of

 

 

 

160 120, or an image not recorded in the 4:3 ratio.

 

 

 

READJUST TRIMMING

You changed the print style after you set the trimming settings.

E

 

 

 

 

 

 

 

PRINTER ERROR

Cancel printing. Turn off the printer and turn it back on. Check

 

 

 

 

 

the printer status.

 

 

 

 

 

 

 

 

 

 

PRINT ERROR

Cancel printing, disconnect the USB cable and turn off the printer.

 

 

 

After a while, turn the printer back on and reconnect the USB

 

 

 

cable. Check the printer status.

 

 

 

 

 

 

When you are printing using the

button, check the print

 

 

 

settings.

 

 

 

 

 

HARDWARE ERROR

Cancel printing. Turn off the printer and turn it back on. Check

 

 

 

the printer status.

 

 

 

 

 

 

 

 

 

 

 

 

RECHARGE THE

The printer battery is depleted.

 

 

 

 

 

PRINTER BATTERY

 

 

 

 

 

 

 

 

 

 

 

COMMUNICATION

The printer is experiencing a data transmission error. Cancel

 

 

ERROR

printing, disconnect the USB cable and turn off the printer. After a

 

 

 

while, turn the printer back on and reconnect the USB cable.

 

 

 

When you are printing using the

button, check the print

 

 

 

settings.

 

 

 

 

 

 

Or, you attempted to print from a memory card that contains a

 

 

 

large number of images. Reduce the number of images.

 

 

 

CHECK PRINT

The print setting cannot be used for printing with the

 

 

SETTINGS

button.

 

 

 

 

 

PRINTER IN USE

The printer is in use. Check the printer status.

 

 

 

 

 

 

 

PRINTER WARMING

Printer is warming up. If the message does not disappear after a

 

 

UP

few seconds, check the printer status.

 

 

 

 

 

 

 

 

 

 

PAPER LEVER ERROR

Paper lever error occurred. Adjust the paper selection lever to the

 

 

 

proper position.

 

 

 

 

 

PRINTER COVER OPEN

Close the printer cover securely.

 

 

 

 

 

 

 

 

 

 

NO PRINTHEAD

No print head is installed in the printer or print head is defect.

 

 

 

Refer to the instruction manual of your printer.

 

 

 

 

 

 

 

 

 

Information

Additional

145