Using the Multi-Image Screen

You can operate the multi-image screen only in the following playback modes:

-When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback

-When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause

In CAMERA mode, set the program selector to Q.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

1. Press the DIGITAL EFFECTS button.

[D.EFFECT ], [FADER], [EFFECT] and [MULTI-S] appear.

2. Select [MULTI-S].

[S.SPEED] and [S.SPLIT] appears.

3. Select [S.SPEED].

[MANUAL], [FAST], [MOD.] and [SLOW] appear.

4.Select the transition speed.

Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*).

* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).

5.Select [MULTI-S] again.

[S.SPEED] and [S.SPLIT] appears.

6.Select [S.SPLIT].

[4], [9], [16] settings appear.

7.Select the number of sequences.8.Press the DIGITAL EFFECTS button.

“MULTI-S” flashes.

9. Press the ON/OFF button.

• MANUAL: Images will be captured each time you press the ON/OFF button. The blue frame indicating the next sequence disappears after the last image. To cancel the last captured image, press and hold the ON/OFF button. To cancel the multi-image screen, press and release the ON/OFF button.

•FAST, MODERATE, SLOW: The set number of images will be captured at the set speed. To cancel the multi-image screen, press the ON/OFF button.

10.Press the start/stop button to begin recording.

The multi-image screen is recorded on the tape.

E

Recording

Advanced

 

- Functions

69