Dividing Scenes
Dividing Scenes
You can divide scenes in order to leave out the best parts and later cut out the rest.
Operating modes:
1 | Play back the scene you want to divide. |
| |
2 | Pause the playback at the point where you want to divide the scene. | 101 | |
3 | Open the scene division screen. | ||
| [Edit] | [Divide] |
|
|
| ||
4Bring the scene to a precise point, if necessary.
•Playback controls will appear on the screen (094). Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.
5Divide the scene. [ADivide] 
[Yes]
•The video from the division point to the end of the scene will appear as a new scene in the index screen.
NOTES
•When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.
•If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
•During the playback of a scene that was divided, you may notice some anomalies in the picture/ sound at the point where the scene was cut.
•Scenes that are too short (less than 3 seconds) cannot be divided.
•Scenes cannot be divided within 1 second from the beginning or the end of the scene.