
Troubleshooting
Sound is distorted or is recorded at lower levels.
-When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. Adjust the audio recording level manually (076).
There are brief stops in the sound recorded with the optional
-This may occur if the LOCK switch on the
The picture is displayed correctly but there is no sound from the | 163 |
-Speaker volume is turned off. Adjust the volume.
-If the
-The AV terminal is set to headphone output. Set 8 [AV/Headphones] to [AV].
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the memory card over and insert it.
Cannot record on the memory card.
-The memory card is full. Delete some recordings (098, 130) to free some space or replace the memory card.
-Initialize the memory card (040) when you use it with the camcorder for the first time.
-The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.
-A compatible memory card must be used to be able to record movies on a memory card (036).
-The folder and file numbers have reached their maximum value. Set 8 [Photo Numbering] to [Reset] and insert a new memory card.
The wireless controller will not work.
- Set 6 [Wireless Remote ontrol] to [On]. - Replace the battery of the wireless controller.
Cannot upload files wirelessly using an
-You may have inserted the
Y.
-6
-Wireless communication is not available in recording mode or while the optional
-Opening the LCD panel may help when the wireless connection is not strong enough.
-During wireless transfer, wireless communication may stop when the wireless signal conditions worsen (happears onscreen). Perform wireless transfer in a place with good signal conditions.
-Contact the card manufacturer’s customer care.
The wireless communication status icon does not appear
-You may have inserted the
Y.