Using a Memory Card

Eye-Fi Cards

This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer.

Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.

37

Inserting and Removing a Memory Card

Make sure to initialize (040) all memory cards before using them with this camcorder.

1 Turn off the camcorder.

• Make sure the ON/OFF (CHG) indicator is off.

2 Open the double memory card slot cover.

3 Insert the memory card straight, with the label facing the

front of the camcorder, all the way into one of the

 

 

COPY

memory card slots until it clicks.

•

You can also use two memory cards, one in each memory

 

card slot.

 

•

To use the wireless communication features of an Eye-Fi

 

card, insert it into memory card slot . Be sure you

 

understand the information provided in Eye-Fi Cards

 

(0 37) before using an Eye-Fi card.

4 Close the double memory card slot cover.

•

Do not force the cover closed if the memory card is not

 

correctly inserted.

 

To remove the memory card

Push the memory card once to release it. When the memory card springs out, pull it all the way out.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is flashing. Failure to do so may result in permanent data loss.

-Do not disconnect the power source or turn off the camcorder.

-Do not remove the memory card.

•Turn off the camcorder before inserting or removing an memory card. Inserting or removing the memory card with the camcorder on may result in permanent data loss.

•Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory card as described in step 3.