Appendix: Menu Options Lists

 

[Audio Output CH]: Selects the channels from which audio will be output.

 

[

 

CH1/CH2]: Audio from CH1 is output from the left audio channel and audio from CH2 is output

 

from the right audio channel.

 

[

 

CH1/CH1]: Audio from CH1 is output from both the left and right audio channels.

 

[

 

CH2/CH2]: Audio from CH2 is output from both the left and right audio channels.

 

[

 

 

All/All]: Audio from CH1 and CH2 is mixed and output from both the left and right audio

 

 

 

 

channels.

153

•

[Audio Output CH] cannot be set for signals output from the HDMI terminal.

 

 

 

 

 

 

[Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller.

[Tally Lamp]: Activates the tally lamp when the camcorder is recording, the camcorder is in standby mode, the wireless controller is being operated, the battery level is low or the memory is full. When set to [BOff], the tally lamp will not turn on in these cases.

[POWERED IS Button]: Determines the operation mode of the POWERED IS button.

[xPress and Hold]: Powered IS will be activated while you hold the button pressed down.

[yToggle On/Off]: Each press of the button will turn the Powered IS function on and off.

[Set WB Priority]: You can press an assignable button set to [mWB Priority] to switch between the current white balance and the white balance setting selected for [Set WB Priority].

[Focus Ring Direction]: Changes the direction the focus ring needs to be turned.

[Focus Ring Response]: Selects the sensitivity of the response when operating the focus ring.

[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.

[Autostart Decoration]: When set to [A n], the decoration screen will open automatically when you stow the LCD panel with the L D screen facing out.

[Power Saving Mode]: Controls the camcorder’s automatic power off settings.

[Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes.

•Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.

•In standby mode, the camcorder will shut off after the time selected for the [Quick Start (Standby)] setting.

[Quick Start (Standby)]: Select whether to activate the Quick Start function (048) when you close the LCD panel in a recording mode and the length of time after which the camcorder will end the standby mode and shut off automatically.

•You can set Quick Start to [Off], for example, if the camcorder is set on a fixed position and you want to keep recording video with the LCD panel closed in order to conserve the battery’s power.

[Battery Info]: Displays a screen where you can verify the battery charge (as a percentage) and the

remaining recording time (, mode) or playback time (, mode).